4 2 5 1 3 4 2 5 6 Frame members Frame members GRP RTM GRP Carthago low-level scooter garage Deep lowering of the scooter garage means maximum storage space and minimal effort when loading. An extremely strong wall to floor connection due to form-fitted and bonded frame members provides a load-bearing capacity of up to 350 kg. Carthago roof/wall connection The typical Carthago curved roof is not only an unmistakeable design element but with the frame members on the inside, it makes a decisive contribution to the rigidity of the main cabin. And all of this without any thermal bridges whatsoever. Another safety plus: less sensitivity to side wind. Carthago floor panel Provides all-round protection. The lower and upper sides are made from GRP, and between them there is a hard foam insulating core made from RTM Styrofoam. The high-stability floor has lifelong protection against humidity and rotting. Liner premium-class body construction Advanced technology inspired by aircraft construction Carthago bodies have strong and durable connections. Where others use screw connections, we apply high-tech. As well as a high degree of stability, a main body reinforced with frame members and special bonding technologies also provides a clear advantage with regard to safety. The frame member for connecting the floor and the side walls acts as side collision protection if the worst comes to the worst. Thanks to features inspired by aircraft construction, the main cabin is not only highly stable, but also light and torsionally rigid. up to 350 60
RkJQdWJsaXNoZXIy NTQ3ODU=